Denso BHT-1170BWB-CE, Руководство пользователя

Страница: 117 / 219

105
Barcode Handy Terminal/2D code Handy Terminal
[20] Resetting the Backup Battery Discharge Counter
The backup battery discharge counter can be reset in the advanced
system menu.
Reset the backup battery discharge counter after replacing the backup
battery.
To reset the backup battery discharge counter, follow the steps below.
1. Open the System Properties menu.
2. Hold down the
SHIFT key and press the “0” key.
The “Backup Battery” screen shown on the right is displayed.
3. Tap the “Reset” button.
The battery backup discharge count is reset to zero (0).

Note

The counter can only be reset after the discharge count
reaches 200.
[21] ActiveSync/WMDC Automatic Connection
The ActiveSync/WMDC is set to automatically connect via the USB as
default.
The ActiveSync/WMDC Automatic Connection can be changed in the
advanced system menu.
To enable or disable, follow the steps below.
1. Open the System Properties menu.
2. Hold down the
SHIFT key and press the “1” key.
The “Communication Settings” screen shown on the right is
displayed.
3. Check or Uncheck the box to enable or disable,
then tap the “OK” button.

Note
 Automatic connection is enabled as default.
[22] Power key
The LED and Beeper can be used as notification devices to notify that the
BHT is turned on by the power key.
To change the notification device, follow the steps below.
1. Open the System Properties menu.
2. Hold down the
SHIFT key and press the “2” key.
The “Power Key” screen shown on the right is displayed.
LED: Blue LED (Default)
Beeper: Beeper
3. Select the notification device.
Both the LED and Beeper can be selected at the same time.