Troubl
eshooting
Information
HDMI
Control
Function
Pl
ayback
Connections
Getting Started
Specifi
cations
ENGLISH
2
HDMI Setup
Setting items
Setting contents
SA-CD Audio Out
Set to output stereo/multi
area audio of Super Audio
CD to the HDMI terminal.
On :
Super Audio CD audio is output.
Off :
Super Audio CD audio is not output.
The Super Audio CD audio signal is a 44.1 kHz/16-bit Linear PCM output.
HDMI Control
Can operate the unit in
conjunction with an HDMI
control support device.
G
Control
H
Off :
Disable the HDMI control function.
HDMI1 On :
Link with the device connected to HDMI1.
HDMI2 On :
Link with the device connected to HDMI2.
G
Power Off Control
H
On :
Turns the DVD-A1UD’s power to standby through linkage to the
TV.
Off :
Does not turn the DVD-A1UD's power to standby through linkage
to the TV.
For the HDMI control function to operate, it is necessary for the DVD-
A1UD or HDMI-compatible TV connected to the DVD-A1UD to have an
HDMI connection.
Refer to “HDMI Control Function” (
v
page 49) for more information
about the HDMI control function.
The HDMI control function from the connected device becomes valid
when, on the GUI menu, “DENON LINK Setup” – “DENON LINK Mode”
is set to “4th” (
v
page 30).
After the “HDMI Control” setting has been changed, always turn off the
power to the connected equipment and then turn it back on.
•
•
•
•
•
•
•
•
•
NOTE
If you set “DENON LINK Setup” – “DENON LINK Mode” on the GUI menu to “4th”, you will no longer
be able to change the “HDMI Control” – ”Control” setting. To change the setting, switch “DENON LINK
Mode” to a setting other than “4th” fi rst and then change the setting.
Setting items
Setting contents
TV Aspect (Aspect ratio)
Set the screen type and
display mode of the TV.
16:9 Squeeze Auto :
Output to a wide screen TV. For 4:3 video, display in
the center of the screen without changing the aspect ratio.
WIDE (16:9) :
Output to a wide screen TV.
4:3 PS :
Output to a 4:3 TV. For wide video, trim the left and right side of
the image and display in 4:3 aspect ratio.
z
1
4:3 LB :
Output to a 4:3 TV. Display all of the wide video.
z
2
Component Resolution
Set the component output
resolution.
480/576i
,
480/576P
,
720P
,
1080i
,
Source Direct :
Output video using its source resolution. Convert the
1080p video source to 1080i.
Progressive Mode
Set
an
appropriate
progressive
conversion
mode for the source video
material.
Auto :
Detect the type of video material and automatically switch the
mode. Normally, this setting is used.
Video1 :
Suitable for playing video material discs.
Video2 :
Suitable for playing video material discs or 30-frame fi lm material
discs.
TV Active Area
Sets the horizontal display
range when the analog
video output resolution is
480i/576i.
Full :
Set when a home-use monitor is connected.
Normal :
This setting is used when video synchronization is disturbed on
a professional-use monitor.
This is not available for HDMI output.
z
1 :Depending on the video content, even though you set the 4:3 PS (
Pan Scan), the content may be
output in 4:3 LB (
Letter Box).
z
2 :Only valid for content recorded in 480i/576i.
Set the video output signal according to the connected TV.
Video Setup
Default settings are underlined.
Remote control operation
buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Decision the setting
:Return to previous menu
Setup
