Troubl
eshooting
Information
HDMI
Control
Function
Pl
ayback
Setup
Getting Started
Specifications
ENGLISH
22
Connecting the Power Cord
Connect the included power cord to the DVD-A1UD, and plug it into an AC outlet.
Power cord
(included)
To household power
outlet (AC 230 V, 50 Hz)
NOTE
Be sure to insert the power plug firmly. Incomplete connection results in noise generation.
•
Once Connections are Completed
On the GUI menu, when “Other Setup” – “Auto Power Mode” – “On” (
v
page 32), the following states are
maintained for about 30 minutes, and then the power is turned automatically to standby.
Turning the Power On
When power is switched to standby
Either press
on the unit, or press
on the remote control.
The power indicator lights red.
n
NOTE
During power standby, a slight amount of power is consumed. To totally cut off the power, remove the
power cord from the power outlet.
Press the unit’s
or the remote control’s
.
The power is turned on, and the power indicator lights green.
“LOADING” appears on the display, and disc information is read.
The “NO DISC” message is displayed when a disc is not loaded.
b
(DVD-A1UD)
(Remote control
unit)
Disc not loaded
Playback has stopped
Stopped due to resume function
•
•
•
Connections
