Connections
Connections
8
ENGLISH
An FM antenna cable plug can be connected directly.
Connecting the antenna terminals
Direction of broadcasting
station
75
Ω
/ohms Coaxial
cable
FM antenna
FM indoor antenna (Supplied)
AM loop antenna
(Supplied)
AM outdoor antenna
Ground
1
4
2
3
¢
AM loop antenna assembly
Connect to the AM
antenna terminals.
Remove the vinyl tie
and take out the
connection line.
Bend in the reverse
direction.
a. With the antenna on
top any stable
surface.
b. With the antenna
attached to a wall.
Mount
Installation hole Mount on wall, etc.
NOTE:
• Do not connect two FM antennas
simultaneously.
• Even if an external AM antenna is used, do
not disconnect the AM loop antenna.
• Make sure the AM loop antenna lead
terminals do not touch metal parts of the
panel.
Connection of AM antennas
1. Push the lever.
2. Insert the conductor.
3. Return the lever.
ENGLISH
Connecting the AM/FM antenna terminals
DAB outdoor antenna
DAB indoor antenna
(Supplied)
Connecting the DAB antenna terminals (DRA-700AEDAB only)
¢
Connecting an DAB outdoor antenna
• If good reception cannot be achieved with the included DAB indoor antenna, use an DAB outdoor
antenna. Connect an F male type connector to the coaxial cable and connect the antenna to the DAB
COAX 75
Ω
/ohms terminal.
¢
Installing the DAB indoor antenna
q
DAB station reception (
page 17).
w
Use “Tuning aid” to set position at which reception sensitivity is optimum (
page 18).
¢
DAB indoor antenna assembly
Mount the antenna’s screw to the stand.
1
2
