11
ENGLISH
Operation
Playing the input source
Use
FUNCTION
to select the input source you want to
play.
Use
VOLUME
to adjust the volume.
• The volume level is displayed on the volume level display.
1
3
Start playback on the selected component.
For operating instructions, refer to the component’s manual.
2
About the button names in this explanation
<
>
: Buttons on the main unit
[
]
: Buttons on the remote control unit
Button name only
:
Buttons on the main unit and remote control unit
[POWER ON]
VOLUME
[TUNER]
BAND
[MUTING]
STATUS
PRESET
FUNCTION
MENU
ENTER
[
D
H
F
G
]
<POWER>
FUNCTION <SPEAKER> <TUNING> MENU
<LOUDNESS>
<SELECT>
BAND
<TONE DEFEAT>
<MODE> PRESET
•
ENTER
VOLUME
<ON/STANDBY>
<PHONES>
<CH VOL>
<DIMMER> STATUS
<TONE CONTROL>
<PURE DIRECT>
Before operating
Turning the sound off temporarily (MUTING)
Press
[MUTING]
.
• Canceling MUTING mode:
To cancel the muting mode, either press
[MUTING]
or adjust the
volume.
Connect the headphones to
<PHONES>
.
• No sound is produced from the speakers automatically.
NOTE:
• To prevent hearing loss, be careful not to raise the volume level
excessively when using headphones.
Listening over headphones
Switching the speakers
Press
<SPEAKER>
to turn the corresponding speaker pair
on.
Press
<ON/STANDBY>
or
[POWER ON]
.
• The power indicator blinks green and the power turns on.
Press
<POWER>
.
£
OFF:
The power turns off and the indicator is off.
¢
ON:
The power indicator lights red.
1
2
ENGLISH
Switching the brightness of the display
Press
<DIMMER>
.
The brightness of the display can be adjusted in three steps. The
display can also be turned off.
Checking the currently playing program source,
etc.
Press
STATUS
.
• The current program source and various settings are indicated on
the display.
