9
ENGLISH
#6
a
a
(Alpha) PITCH BEND – button
#7
a
a
(Alpha) PITCH BEND + button
• Pushing these buttons will change Alpha-Track
playing speed temporary.
• While pushing
a
(Alpha) PITCH BEND + button
playing speed increases and speed decreases
while pushing
a
(Alpha) PITCH BEND – button.
• When release button, playing speed returns to
the previous speed.
•
a
a
(Alpha) CUE-CLR:
If the
a
(Alpha) CUE button is pushed while
pushing the
a
(Alpha) PITCH BEND – button,
the Alpha-Cue point is cleared.
#8
TAP, LOCK, AUTO/INPUT
BPM
button
•
TAP:
When you push this button repeatedly, the
Auto mode turns off and starts measuring your
Beats Per Minute (BPM) by tapping.
•
LOCK:
When this button is pressed once while the
auto BPM counter is operating, the data
measured by the auto BPM counter is locked.
•
AUTO:
When pushing the TAP button for 1 second,
activates AUTO BPM mode.
The measured BPM is displayed in the
character section of the display.
•
INPUT BPM :
When the TAP button is pressed and held in for
more than 2 seconds, the BPM input mode is
set and the BPM value can be input directly
with the PARAMETERS knob. When the button
is pressed again, the BPM input mode is turned
off.
NOTE:
If you select a new track, AUTO BPM mode turns
on automatically.
#9
PITCH BEND – button
$0
PITCH BEND + button
• Pushing these buttons will change main
playing speed temporary.
• While pushing PITCH BEND + button playing
speed increases and speed decreases while
pushing PITCH BEND – button.
• When release button, playing speed returns to
the previous speed.
@7
DISPLAY MAIN/
a
a
(Alpha), TITLE
button
•
DISPLAY MAIN/
a
a
(Alpha):
A quick push will display changes between
MAIN display and
a
TRACK display.
•
TITLE:
When there is CD text data, the CD text data
is displayed when the button is pressed for
more than 1 second.
The display returns to normal after the CD text
data is displayed.
@8
CONT./SINGLE, RELAY
button
•
CONT./SINGLE:
Short pushing play ending mode between
CONT (continue: play more tracks) and
SINGLE (stop playing at current track played).
•
RELAY:
You can turn on and off RELAY PLAY mode.
Relay playback is possible when two DN-
S5000s are connected by X-EFFECT.
@9
TIME, T.TIME
button
•
TIME:
A quick push will display mode changes
between ELAPSED TIME and REMAIN TIME.
•
T.TIME:
A long push, will display mode changes
between TRACK TIME and DISC TIME.
• So, you can select display mode from four
modes, TRACK ELAPSED, TRACK REMAIN,
DISC ELAPSED and DISC REMAIN.
#0
MEMO, PRESET
(/ PROGRAM/RANDOM) button
•
MEMO:
The memo mode starts when this button is
pushed once in the Cue mode.
•
PRESET:
When this button is pushed for more than 1
sec, the PRESET mode starts.
•
PROGRAM:
When the Preset mode is selected, with a
short push, you can make list of program play
and turn on/off Program play mode using
PARAMETERS knob.
•
RANDOM:
When the Program mode is selected, with a
short push, Random play mode can be turned
on/off with PARAMETERS knob.
#1
FAST SEARCH knob (
6 7
)
• Fast-forward playback is selected when
moved to the
7
side, fast-reverse playback
is selected when moved to the
6
side.
#2
a
a
(Alpha) MODE,
MIRROR MIX
button
•
a
a
(Alpha) MODE:
Use this to turn the Alpha-Mode on and off.
The Alpha-Mode playback sound is outputted
from the ALPHA OUT jacks in the Alpha-
Mode.
•
MIRROR MIX:
The Mirror Mix mode is selected when this
button is pressed and held in for more than 1
second.When the button is pressed and held
in for more than 1 second, the Mirror Mix
mode is turned off.
In the Mirror Mix mode, the Alpha-Track is
played with a delay of the specified beat or
time after the Main Track.
#3
a
a
(Alpha) CUE/SAMP. STOP button
•
a
a
(Alpha) CUE
:
Use this as CUE and STUTTER button in
Alpha-Track.
This button lights up when the Alpha-CUE
point is set.
•
SAMP. STOP:
Push while Sampler playback, Sampler
playback stops.
#4
TRACK/PARAMETERS knob
•
TRACK:
When PARAMETERS LED is on, turn this knob
to select tracks.
By pushing this knob down while turning, the
tracks will change 10 at a time.
•
PARAMETERS:
When the PARAMETER LED is flashing, turn
this knob to select and change the parameter
for items found in the Platter effects, Program,
Memo, and Preset data, etc.
#5
a
a
(Alpha) track Play/Pause button
(
13
)
• When this button is pushed while in the Cue
or Pause mode, the Alpha-Track playback
starts. By pushing it once again will Pause the
Alpha-Track.
• It is necessary to make Cue point for the
Alpha-Track before starting Alpha-Track
playback.
$1
Pitch Slider
• Use this slider to adjust playing speed.
• The playing speed decreases when slide
upwards and increases downwards.
$2
PITCH/KEY, RANGE
button
• With this button you can select PITCH and
KEY ADJUST mode. Mode changes Pitch on,
Key Adjust on and both off cyclically. PITCH
LED indicates in Pitch mode and KEY ADJUST
indicator lights up in Key Adjust mode.
•
RANGE:
Push this button for more than 1 sec to select
the pitch range.
$3
DUMP/RVS, SOURCE
button
•
DUMP/RVS:
Push this button a short time to select the
effect function from RVS and DUMP.
•
SOURCE:
When this button is pressed and held in for
more than 1 second, the source for which the
Platter effect function is to be used (Main,
Alpha-Track or Main and Alpha-Track) can be
selected with the PARAMETERS knob.
$4
BRAKE/ECHO, TIME
button
•
BRAKE/ECHO:
Push this button a short time to select the
effect function from BRAKE and ECHO.
•
TIME:
If pushed for more than 1 sec, you can select
time for BRAKE or ECHO with PARAMETERS.
$5
DRAG-S, TIME
button
•
DRAG-S:
Push this button a short time to set the DRAG-
S.
•
TIME:
If pushed for more than 1 sec, you can select
time for DRAG-S with PARAMETERS.
Содержание DN S5000 - DJ Table Top Single CD Player
Страница 2: ......
