Denon DN S5000 - DJ Table Top Single CD Player, Руководство по эксплуатации

Страница: 26 / 49

24
ENGLISH
15
PROGRAM/RANDOM/RELAY PLAY/POWER ON PLAY
q
,
e
★
3
w
,
r
,
t
,
y
★
1
★
2
Program play
• Up to 25 tracks from one disc can be programmed.
• Programs for up to six discs (one program per disc) can be stored in the non-volatile memory for later recall.
NOTE: Such functions as Hot Start, Sampler, Mirror Mix, and Platter Effect do not operate during programmed
playback.
2
-1
Input Program (Prog.In)
Input the program for program playback.
r
Turn the
PARAMETERS knob to
select the track.
t
Push the
PARAMETERS knob
to input the selected
track to the program.
★
1 Insert Tracks to Program
• You can insert tracks to the previously
programmed tracks.
• One track can be inserted at a time using
the PITCH BEND + button and return
r
.
4
Start Program Play (Prog.On)
• When “Prog.On” is selected, DN-S5000 will
cue up at the first track in the program.
• Program playback starts when the 13
button is pushed.
★
3 You can use program repeat play function
with push EXIT/RELOOP button.
PARAMETERS
ON / OFF
PUSH
PARAMETERS
ON / OFF
PUSH
2
-2
★
2 Clear Tracks from Program
• You can clear tracks from the previously
programmed tracks.
• One track can be cleared at a time using
the PITCH BEND – button.
6
Store Program (MemoSet)
• When “Memo Set” is selected, the program
that has been set is stored in the non-volatile
memory.
7
Call Program (MemoCall)
• When “MemoCall” is selected, the program
stored in the non-volatile memory is loaded
and the program play mode is set.
8
Clear Program (Memo Clr)
• When “Memo Clr” is selected, the program
for the loaded disc is cleared.
• To clear all Program Memo use Preset
function.
5
Cancel Program mode (Prog.Off)
• When “Prog.Off” is selected, the program
play mode turns off and returns to normal
play mode.
3
y
Push the
PARAMETERS knob
again to return step
2-
1
–
r
.
• Repeat these steps to input whole
program.
• Push the PRESET button to end the
program input mode, then proceed to
Start Program Play (Prog.On).
PARAMETERS
ON / OFF
PUSH
1
Program mode select
q
In the Cue or pause
mode, push the PRESET
button for more than 1
sec to select preset
mode.
When the PRESET button is pressed at this
time, the program mode is selected.
✽
The mode switches in the following
order each time the PRESET button is
pressed (short press): preset mode
→
program mode
→
random mode
→
off.
w
Turn the
PARAMETERS knob to
select the various
program setting
modes as follows.
Prog.In, Prog.On, Prog.Off,
MemoSet, MemoCall,
Memo Clr
Depending on conditions, some modes
cannot be selected.
e
Push the PRESET button
again to exit program
mode.
PARAMETERS
ON / OFF
PUSH
MEMO
PRESET
MEMO
PRESET