166
MULTI ZONE MUSIC ENTERTAINMENT SYSTEM
[1] ZONE2 playback
The AVC-A1XVA is equipped with pre-out terminals for which the volume is adjustable and video output terminals (composite, S-Video and
component) as the ZONE2 output terminals.
A separately sold power amplifier or premain amplifier can be connected to enjoy ZONE2 playback.
2
ZONE2 5.1-channel system
• 5.1 channel playback is possible in ZONE2 if “5.1CH” is selected for the ZONE2 playback channel setting at “7-1. Channel Setup” (See
pages 96 ~ 99) in the System Setup Menu. (Default setting of ZONE2 channel is “5.1CH”.)
AVC-A1XVA
DVD player
Input
Monitor
MAIN ZONE 9.1-channel system
ZONE2
AUDIO OUT
(VARIABLE OUT)
ZONE2
VIDEO OUT
Monitor
ZONE2 5.1-channel system
Power amplifier
C
FL
FR
SL
A
SW
SR
A
FL
FR
SL
SW
SR
SB
R
SR
B
SB
L
SL
B
C
B
P
B
COMPONENT
VIDEO IN
Y
P
R
VIDEO
IN
S-VIDEO
IN
L
R
R
L
MULTI SOURCE AUDIO signal cable
Monitor
Power amplifier
Subwoofer
Center
Surround
Front
ZONE2 VIDEO signal cable
13 MULTI ZONE
Multi-zone playback with multi-source
MULTI ZONE MUSIC ENTERTAINMENT SYSTEM
• When the outputs of the “ZONE2 (ZONE3, ZONE4)” OUT terminals are wired and connected to power amplifiers installed in other rooms,
different sources can be played in rooms other than the MAIN ZONE in which this unit and the playback devices are installed. (Refer to ZONE2
(ZONE3, ZONE4) on the diagram below.)
• Settings can be made at “7-2. Power Amp Assign” in the System Setup Menu so that the same source as the ZONE2 (ZONE3, ZONE4) pre-
out terminals can be played from the speakers connected to the ZONE2 (ZONE3, ZONE4) speaker terminals. (See pages 100 ~ 104)
To control playback devices other than the ones above, either use that device’s Remote control unit or preset a separately sold programmable
Remote control unit.
NOTES:
• For the AUDIO output, use high quality pin-plug cords and wire in such a way that there is no humming or noise.
• For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.
• Video signals are output from the ZONE3 video output terminals even when the power of ZONE3 is turned off.