65
Basic version
Simple version
Information
ENGLISH
Advanced version
n
HDMI control function
(
v
page 65)
n
Sleep timer function
(
v
page 66)
n
Adjusting the volume of the speakers
(
v
page 66)
n
Quick select function
(
v
page 67)
n
REC OUT mode
(
v
page 67)
n
Party mode function
(
v
page 68)
n
Operating a media controller to play music and still
pictures
(
v
page 69)
n
Web control function
(
v
page 70)
n
Various memory functions
(
v
page 71)
Playback (Basic operation)
(
v
page 28)
Selecting a listening mode (Surround Mode)
(
v
page 50)
Playback (Advanced operation)
Convenient functions
HDMI control function
When you make an HDMI connection with a TV or player compatible
with this unit and HDMI control functions, you can perform the
following operations by setting the HDMI control function of each
device.
n
This unit power off can be linked to the TV power off
step.
n
You can switch audio output devices with a TV
operation.
When you set “Output audio from amp” in the TV audio output
setup operation, you can switch the amp power on.
n
You can adjust this unit volume in the TV volume
adjustment operation.
n
You can switch this unit input sources through
linkage to TV input switching.
n
When playing the player, this unit input source
switches to the source for that player.
NOTE
•
When “HDMI Control” – “Control” is set to “ON”, it consumes
more standby power.
• The HDMI control function controls operations of a TV that is
compatible with the HDMI control function. Make sure that the TV
and HDMI are connected when you perform HDMI control.
• Some functions may not operate depending on the connected TV
or player. Check the owner’s manual of each device for details
beforehand.
• When “Power Off Control” on the menu is set to “OFF” (
v
page 99),
this unit is not set to standby even if the connected device is in the
standby mode.
•
When connection changes are implemented, such as adding
connections to HDMI devices, linked operations may be initialized.
In this case, you will need to reconfi gure the settings.
• When “HDMI Control” – “Control” is set to “ON”, it is not possible
to assign an HDMI connector to “TV” at “Input Assign” (
v
page 82).
1
'0,RXWSXWFRQQHFWRUFRUUHVSRQGLQJZLWK
WKH+'0,FRQWUROIXQFWLRQ
Set “HDMI Control” – “Control” (
v
page 99) to “ON“.
2
7XUQWKHSRZHURQIRUDOOWKHHTXLSPHQWFRQQHFWHG
E\+'0,FDEOH
3
6HW WKH +'0, FRQWURO IXQFWLRQ IRU DOO HTXLSPHQW
FRQQ'0,FDEOH
•
Please consult the operating instructions for the connected
equipment to check the settings.
• Carry out steps 2 and 3 should any of the equipment be unplugged.
4
6ZLWFK WKH WHOHYLVLRQ LQSXW WR WKH +'0, LQSXW
FRQQHFWHGWRWKLVXQLW
5
6ZLWFKWKLVXQLWLQS'0,LQSXWVRXUFHDQG
FKHFNLIWKHSLFWXUHIURPWKHSOD\HULVRN
6
:KHQ \RX WXUQ WKH 79¶V SRZHU WR VWDQGE\ FKHFN
WKDWWKHSRZHURIWKLVXQLWDOVRJRHVWRVWDQGE\
If the HDMI control function does not operate properly, check the
following points.
• Is the TV or player compatible with the HDMI control function?
• Is “HDMI Control” – “Control” (
v
page 99) set to “ON”?
• Is “Power Off Control” (
v
page 99) set to “All” or “Video”?
• Is “Control Monitor” (
v
page 99) set for the monitor output
connected to television?
• In the case of dual monitor connection, is “Control Monitor”
(
v
page 99) on the menu set to a monitor without HDMI control?
• Are the HDMI control function settings of all equipment correct?
NOTE
Should any of the operations below be performed, the interlocking
function may be reset, in which case, repeat steps 2 and 3.
• “Input Assign” – “HDMI” (
v
page 82) setting has changed.
• “Monitor Out” (
v
page 98) setting is changed.
• There is a change to the connection between the equipment and the
HDMI, or an increase in equipment.
