manualshive.com logo in svg

Denison Hydraulics P07 C-mod, Информация о сервисе, Страница: 26 / 80

Поделиться
Скачать
Denison Hydraulics P07 C-mod Скачать руководство пользователя страница 26

CONTROLS

26

PORT SIZES

......................DESCRIPTION ........................................................................................P07 C MOD  . . . . .P110 C MOD

PORT C1 ......OFF-STROKE CYLINDER GAGE................................................................SAE-4  . . . . . . . . .1/4 BSPP

PORT C2 ......ON-STROKE CYLINDER GAGE..................................................................SAE-4  . . . . . . . . .1/4 BSPP

PORT D ........CASE DRAIN ..............................................................................................SAE-20 . . . . . . . .1-1/4 BSPP

PORT D1 ......CASE DRAIN ..............................................................................................SAE-20 . . . . . . . .1-1/4 BSPP

PORT DG......DRAIN GAGE, AIR BLEED PORT ..............................................................SAE-4  . . . . . . . . .3/8 BSPP

PORT AG......INLET GAGE ................................................................................................SAE-4  . . . . . . . . .1/4 BSPP

PORT BG......SYSTEM GAGE ............................................................................................SAE-4  . . . . . . . . .1/4 BSPP

PORT BG1....ALTERNATE SYSTEM GAGE......................................................................SAE-6  . . . . . . . . .1/4 BSPP

PORT E ........ELECTROHYDRAULIC STROKER SERVO SUPPLY ................................SAE-4  . . . . . . . . .1/4 BSPP

PORT H ........HYDRAULIC STROKER SIGNAL................................................................SAE-4  . . . . . . . . .1/4 BSPP

PORT LS ....LOAD SENSING LINE..................................................................................SAE-4  . . . . . . . . .1/4 BSPP

PORT V ........COMPENSATOR, TORQUE LIMITER, LOAD SENSING VENT ................SAE-8  . . . . . . . . .3/8 BSPP

PORT V1 ......SERVO VENT ..............................................................................................SAE-4  . . . . . . . . .1/4 BSPP

PORT X ........SERVO SUPPLY ..........................................................................................SAE-6  . . . . . . . . .3/8 BSPP

PORT XG ......SERVO GAGE  ............................................................................................SAE-10  . . . . . . . .1/2 BSPP

HYDRAULIC STROKER

In the hydraulic stroker, a spring loaded piston is attached to the pin.  A control pressure of 50 psi, 3,45 bar causes the
piston to commence to move against the spring, to position the pin in proportion to the control pressure, and thus
cause the pump to stroke in proportion to control pressure.  Full displacement is achieved at 225 psi, 15,5 bar.

ELECTRIC STROKER

By mounting an electrically modulated pressure control valve on the hydraulic stroker to establish the control pressure,
pump displacement is controlled by an electrical signal.  For a 24 volt coil, the pump commences to stroke at approxi-
mately 175 mA electrical signal, and will be at full displacement at approximately 275 mA.

PRESSURE COMPENSATOR  AND TORQUE LIMITER OVERRIDE

An override pressure compensator or a torque limiter control mounts on the smaller diameter of the control piston,
opposite the servo, hydraulic or electric stroker.  In the normal position, the spool in the override control connects this
piston to the control valve on the opposite side, allowing control by the stroker.  When system pressure or torque
exceed the override setting, this spool connects system pressure to the smaller diameter control piston, to override the
rotary servo, hydraulic or electric stroker command and reduce displacement according to the compensator or torque
limiter setting.  Override pressure must be sufficient to overcome servo pressure acting on the larger diameter piston.

TIGHTENING TORQUE FOR HYDRAULIC PLUGS

PORT SIZE

ft-lbs

Nm

SAE-4

11

15

SAE-6

18

24

SAE-8

46

62

SAE-10

75

102

SAE-14

130

175

SAE-16

135

183

1/4 BSPP

18

24

3/8 BSPP

18

24

1/2 BSPP

93

126

1” BSPP

146

198

www.comoso.com

Содержание P07 C-mod

















































































Отзывы:

Нет отзывов