page 73 • DENAGO
Seat - Seat Post SPEC
Component
Torque Spec
Newton Meters (NM)
Torque Spec
Inch-Pound (IN-LB)
Torque Spec
Foot-Pounds (FT-LBS)
Seat Rail to Seat Post
19.66-39.21
174-347
14.5-28.92
Seat Post Binder (IF BOLT)
seat post requires only
minimal tightening to
not slide downward.
Avoid over tightening
seat post requires only
minimal tightening to
not slide downward.
Avoid over tightening
seat post requires only
minimal tightening to
not slide downward.
Avoid over tightening
Quick release Seat Post
Measured torque not
typically used.
Common industry
practice is resistance
at lever halfway
through swing from
open to fully closed.
Measured torque not
typically used.
Common industry
practice is resistance
at lever halfway
through swing from
open to fully closed.
Measured torque not
typically used.
Common industry
practice is resistance
at lever halfway
through swing from
open to fully closed.
Crankset - Bottom Bracket - Pedal SPEC
Component
Torque Spec
Newton Meters (NM)
Torque Spec
Inch-Pound (IN-LB)
Torque Spec
Foot-Pounds (FT-LBS)
Pedal into crank
16.95
150
12.5
Crank bolt (including spline - type
cranks and square spindle cranks)
34.46-44.18
305-391
25.42-32.58
Chainring bolt - steel
7.91-10.73
70.95
5.83-7.92
Chainring bolt - aluminum
4.97-9.94
44-88
3.67-7.33
Derailleur - Shift SPEC
Component
Torque Spec
Newton Meters (NM)
Torque Spec
Inch-Pound (IN-LB)
Torque Spec
Foot-Pounds (FT-LBS)
Rear derailleur mounting bolt
7.91-9.72
70-86
5.83-7.18
Rear derailleur cable inch bolt
3.96
35
2.916666667
Rear derailleur pulley wheel
3.05-3.84
27-34
2.25-2.83
Front derailleur clamp mount
4.97-6.78
44-60
3.67-5
Front derailleur cable pinch
4.97-6.78
44-60
3.67-5