DENAGO Model 1 Скачать руководство пользователя | Manualshive

Страница: 16 / 77

background image

CITY MODEL 1 • VERSION 1

H. E-Component

WARNING:The battery pack voltage must match the battery pack charging voltage of
the charger. Otherwise, there is a risk of fire and or explosion. ONLY use the factory
provided system of battery and charger.
DO NOT modify alter or make any changes to your E-Components- Battery, Motor,
Monitor, and or Throttle. Any changes, modifications and/or altering will void warranty
and could cause injury, serious injury or even death.

Changing the Assistance Level- Changing the E-Assist level while riding will increase or decrease
the acceleration of your eBike. You should show extreme caution and be very familiar with this
system and the changes. Be aware of your surroundings, traffic, weather, etc., not traction,
awareness, and overall handling can be influenced with these changes.

eBikes are heavier than traditional bikes. Be aware. Park to be safe and insure they cannot fall
over or cause damage to you or anyone or your bike.

DO NOT ride of submerge your eBike in water. You could lose control but also could cause
erious damage to your eBike components.

Child Safety - if wishing to use a bike trailer please contact and consult with the trailer
manufacturer to ensure compatibility.

Bicycle Rack for Car - if wishing to use a car rack, trailer hitch rack or any type of device to
transport your eBike please contact and consult the rack manufacturer.
Your eBike is heavy, and you may need a specific and or unique rack.

Be aware and understand all rules, regulations, and laws.

Always reference and know your local laws.

https://www.peopleforbikes.org/electric-bikes/policies-and-laws

If you have any questions, or if you feel anything about the eBike is not as it should be,

consult BIKE.com at [email protected] or call at 1-(877)-755-2453(BIKE)

or ask your dealer your dealer before you ride

«
...
14
15
16
17
18
...
»

Содержание Model 1














































































Отзывы:

Нет отзывов

Похожие инструкции для Model 1

Бренд: JDbug Страницы: 63

Бренд: AREBOS Страницы: 8

Zero 8 Authentic Blue

Бренд: Kettler Страницы: 80

Бренд: DAELIM Страницы: 65

Moto Fino MF125QT-7

Бренд: Roketa Страницы: 30

Бренд: KMART Страницы: 3

Бренд: BMS Страницы: 48

PRIME SCOOTERS EWB-TRI48V-R

Бренд: Enerwatt Страницы: 16

Бренд: Hover-1 Страницы: 24

Бренд: Razor Страницы: 6

Бренд: VICI Страницы: 22

Buzzaround XL GB116

Бренд: Golden Technologies Страницы: 96

Бренд: Crane Страницы: 16

Бренд: Archos Страницы: 54

Accelerator Series

Бренд: Razor Страницы: 11

Бренд: Rollplay Страницы: 22

Бренд: VESPA Страницы: 80

SPIRIT 150 3V ABS

Бренд: VESPA Страницы: 102

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды