DENAGO Model 1 Скачать руководство пользователя

Страница: 2 / 77

CITY MODEL 1 • VERSION 1

IMPORTANT:

This manual contains important safety, performance, and service information.

Read it before you take the first ride on your new eBike and keep it for reference.

Additional safety, performance, and service information for specific components such as

suspension or pedals on your eBike, or for accessories such as helmets or lights that you

purchase, may also be available. Make sure that your dealer has given you all the

manufacturers’ literature that was included with your eBike or accessories. In case of a conflict

between the instructions in this manual and information provided by a component

manufacturer, always follow the component manufacturer’s instructions.

If you have any questions or do not understand something, take responsibility for your safety

and consult with

BIKE.com

[email protected]

or call at

1-(877)-755-2453(BIKE)

or visit your dealer

or the eBikes manufacturer.

NOTE:

This manual is not intended as a comprehensive use, service, repair,

or maintenance manual. Please contact BIKE.com at [email protected] or call at

1-(877)-755-2453(BIKE) or see your dealer for all service, repair, or maintenance.

Your dealer may also be able to refer you to classes, clinics, or books on eBike use,

service, repair, or maintenance.

Содержание Model 1














































































Результаты поиска

Содержание Model 1

Отзывы:

Похожие инструкции для Model 1

Бренды по названию

Популярные бренды

DENAGO Model 1, Руководство пользователя

Результаты поиска

Содержание Model 1

Отзывы:

Похожие инструкции для Model 1

Бренды по названию

Популярные бренды