DEMAG DRC-DR D2, Руководство по эксплуатации

Страница: 9 / 28

9
21495344.indd/31
1007
2.5 Safety instructions
for installation and
disassembly
2.6 Safety instructions
when first putting the
unit into service after
completing installation
Personnel assigned to working with the product must have read the operating
instructions and the safety instructions.
All activities relating to the product which are not described in the operating instruc-
tions may only be carried out by specifically trained specialist personnel.
The owner must ensure that personnel work in a safety and hazard-conscious
manner in compliance with the operating instructions.
The owner must ensure that product is only operated when in proper working order
and that all relevant safety requirements and regulations are complied with.
The product must be taken out of service immediately if functional defects or
irregularities are detected.
In the event of a stoppage (e.g. if defects regarding safe and reliable operation are
detected, in emergency situations, in the event of operating malfunctions, for main-
tenance purposes, if damage is detected or after finishing work), the operator/ex-
perienced technician must carry out all prescribed safety measures or observe that
they are automatically carried out.
Personal protective clothing must be worn as necessary or as required by regula-
tions. Personnel must not wear loose clothing, jewellery including rings or long hair
loose. Injury may occur, for example, by being caught or drawn into the mecha-
nism.
All safety and hazard warnings on the product, its access routes and mains con-
nection switches must be preserved completely and in legible condition.
Modifications, additions to and conversions of the product which might impair
safety in any way must not be carried out without the approval of Demag.
Safety devices must not be rendered inoperative.
Only genuine Demag spare parts may be used. Observe prescribed deadlines or
those specified in the operating instructions for routine checks/inspections.
• Installation and disassembly work may only be performed by experienced
technicians.
• Installation and disassembly work must be co-ordinated by the person carrying
out the work and the owner within the scope of their responsibility.
• The assembly zone must be made safe.
• The installation must be isolated in accordance with the relevant electrical
regulations.
• Customer-specific regulations must be observed.
• Only appropriate, tested and calibrated tools may be used.
• The working and/or danger zone must be made safe.
• The commands for controlling the motion drives are disabled in the DRC-DR
radio receiver until a radio transmitter has been clearly assigned and specified
by means of the relevant initialisation dialogues and the crane ID. See radio
transmitter operating instructions (DRC-10 or DRC-J).
• In the course of putting the product into service, it may be necessary to render
safety devices or features inoperative when carrying out adjustments or function
checks.
• When putting the machine into service, it may be necessary to perform work in
the danger zone, therefore, it must be ensured that only appropriately trained
personnel are employed for this work.