background image

5

21495344.indd/31

1007

1.5 Definitions

Owner

Owners (employer, company) are defined as a person who owns such a system 
and who uses it appropriately or allows it to be operated by suitable and instructed 
persons.

Operating personnel/operator

Operating personnel or operators are defined as persons entrusted by the owner 
of the system with the operation of the system.

Specialist personnel

Specialist personnel are defined as persons assigned by the owner of the system 
to carry out special tasks such as installation, setting-up, maintenance and fault 
elimination.

Qualified electrician

Qualified electricians are defined as persons who, owing to their technical training, 
knowledge and experience of electrical installations as well as knowledge of the 
relevant standards, codes of practice and regulations, are able to assess the tasks 
given to them and to identify and eliminate potential hazards.

Trained person

Trained persons are defined as persons who have been instructed and trained 
for the tasks assigned to them and on the possible hazards resulting from incor-
rect handling and who have been informed about the required protective devices, 
protective measures, relevant regulations, codes of practice, accident prevention 
regulations and operating conditions and who have proven their qualifications.

Experienced technician

Experienced technicians are defined as persons, who, owing to their technical 
training and experience, have sufficient knowledge of these systems and are fa-
miliar with the relevant national industrial safety regulations, codes of practice, 
accident prevention regulations, directives and generally accepted engineering 
standards enabling them to judge the safe operating condition of such systems.

Содержание DRC-DR D2





























Отзывы: