DEMAG DRC-DR D2, Руководство по эксплуатации

Страница: 7 / 28

7
21495344.indd/31
1007
The number of transmitters that operate without any interference in a given area
depends on the relevant radio solution design of all systems and the selectivity of
each individual system.
If this limit is exceeded continuously or for certain periods, additional technical
measures may be necessary in order to ensure simultaneous and interference-
free operation of the radio systems. Whether and to which extent such measures
are required can only be determined by means of suitable measurements on site
or when the system is put into operation. Demag is not responsible for such addi-
tional technical measures.
Radio remote control systems of the DRC range are exclusively intended for sin-
gle-transmitter operation; i.e. there is always a clear assignment between a spe-
cific transmitter and the corresponding receiver.
Radio remote control systems of the DRC range may only be operated when in
perfect working order by trained personnel in accordance with the relevant safety
and accident prevention regulations. This also includes compliance with operating
and maintenance conditions specified in the operating instructions.
In Germany, the owner of a crane installation with radio control system is responsi-
ble for compliance with accident prevention regulations BGV D6.
For appropriate use, the information in the operating instructions for the receiver
used (DRC-DR/DRC-MP) and the machine/crane installation to be controlled must
be complied with in addition to the information contained in these operating in-
structions (see accompanying documents, page 2).
Serious personal injury or damage to property may occur in the event of:
• unauthorized removal of covers,
• inappropriate use of the product/system,
• incorrect operation,
• insufficient maintenance,
• working on live parts.