4 6
Ultron HPH Series UPS
NOTE:
Regarding
Figure 6-12~6-14
HDFK¿JXUHUHSUHVHQWVWKDWWKHXWLOLW\$&SRZHULV
the TN system and a 3-pole protective device is installed between the UPS and
the utility AC power. If your utility AC power is the TT system, please install a 4-pole
protective device between the UPS and the utility AC power.
6
Use the provided parallel cable to connect the parallel ports on the parallel units.
Please see
Figure 5-2
for parallel port location.
7
Please refer to
Chapter 5 : Communication Interfaces
to set the parallel switch in
the
ON
or
OFF
position.
8
Ground the parallel UPSs.
WARNING:
1. When UPSs are paralleled, the length of each unit’s input cables/ output
cables must be equal. This ensures that the parallel UPSs can equally share
the equipment loads in bypass mode.
2QO\836VZLWKWKHVDPHFDSDFLW\YROWDJHDQGIUHTXHQF\FDQEHSDUDOOHOHG
otherwise, parallel functions will fail.
%HIRUHVWDUWXSRISDUDOOHOXQLWVTXDOL¿HGVHUYLFHSHUVRQQHOVKRXOGVHW,'
1, 2 or 3) through LCD. Otherwise, UPSs can not be started.
Содержание HPH-100K
Страница 80: ...5013226402...