Delta ASD-B2-0121-F, Руководство пользователя

Страница: 133 / 291

Parameters ASDA-B2-F
7-16
September, 2015
7
P0-35:
Mapping parameter: P0-35; Mapping content: P0-25
When PH
≠
PL, it means the content of P0-25 includes two 16-bit parameters.
VH=*(PH), VL=*(PL)
Mapping parameter: P0-35; Mapping content: P0-25
When PH=PL=P, it means the content of P0-25 includes one 32-bit parameter.
V32=*(P) If P=060Ah (P6-10), then V32 is P6-10.
The setting format of PH, PL is:
A: parameter indexing (hexadecimal)
B: parameter group (hexadecimal)
For example:
If the mapping target is P2-06, set P0-35 to 0206.
If the mapping target is P5-42, set P0-35 to 052A.
For example:
If users desire to read / write P1-44 (32-bit) through P0-25, set P0-35 to 0x012C012C via panel or
communication. Then, when reading / writing P0-25, it also reads / writes P1-44.
Moreover, users can also access the value of P2-02 and P2-04 through P0-25.
P2-02 Position feed forward gain (16-bit)
P2-04 Speed control gain (16-bit)
Users only need to set P0-35 to 0x02040202. Then, when reading / writing P0-25, it also reads /
writes the value of P2-02 and P2-04.
P0-36 MAP2A Target Setting of Mapping Parameter P0-26
Address: 0048H
0049H
Operational
Interface:
Panel / Software Communication
Related
Section:
4.3.5
Default: 0
Control
Mode:
ALL
Unit: - Range:
Determined by the communication
address of the parameter group
Format: HEX Data Size: 32-bit
Settings:
P0-37 MAP3A Target Setting of Mapping Parameter P0-27
Address: 004AH
004BH
Operational
Interface:
Panel / Software Communication
Related
Section:
4.3.5
Default: 0
Control
Mode:
ALL
Unit: - Range:
Determined by the communication
address of the parameter group
Format: HEX Data Size: 32-bit
Settings: