P0522
DELTA WATER ENGINEERING
V01/2017/P8
3.7
Connect the brine valve (#5) to the softener by means of the Ø4mm
flexible tube. Insert the tube as far as possible (to stop) into the quick-
release couplings. Make sure not to squeeze the tube; avoid kinks.
3.8
The unit can be installed in the container in three different ways: at the
back, to the left or to the right. The support at the bottom of the container
must be placed accordingly. Please refer to the figures on the following
page.
3.8.1
Connections at the back:
The arrow on the support in the container must be pointing to the back.
Place the device in the container with the connections at the back, as shown
below.
