P0522
DELTA WATER ENGINEERING
V01/2017/P5
3.4
Make sure to install the supplied overflow tap. You can find the overflow in
the salt container. The overflow needs also to be connected with the D.O.D.
(see par. 3.5)
First, pierce a hole (Ø21mm) in the side wall of the salt container. The
location of the hole is not important, make sure however that it is approx.
10cm down from the top edge of the salt container. Once the hole has been
drilled, mount the overflow tap and secure it with the supplied nut.
After drilling, remove all bits of plastic that have fallen into the salt
container. A separate instruction leaflet with detailed information has been
added to the device.
3.5
To connect the flexible drain pipe from the softener (par 3.3) and from the
overflow (par 3.4) with a fixed drain pipe, you should use the provided
D.O.D. (Delta Open Drain).
This part provides the obligatory interruption
according to the European standard EN1717.
If the softener is connected to a fixed
drain pipe without this D.O.D., the
guarantee on the unit is expired.
The part with the two connections and the
transparent part are snapped into one
another. If they come apart , they can easily
be snapped back together.
1.
Connection 1 for spirally reinforced drain
tube Ø13mm.
2.
Connection 2 for spirally reinforced drain
tube Ø13mm.
3.
Connection for socket. (drain pipe
Ø40mm)
4.
Connections for drain pipe Ø40mm.
