P0522
DELTA WATER ENGINEERING
V01/2017/P6
3.5.1
Connect the spirally reinforced drain tube Ø13mm, that comes from the unit,
with one of the two connections on the D.O.D. Push it on as far as possible.
3.5.2
Connect the spirally reinforced drain tube Ø13mm, coming from the overflow,
with the other connection. Push it on as far as possible. This is only possible if
the overflow of the salt container is higher than the connection on the D.O.D.
3.5.3
If the part with the connections for the tubes is disconnected from the
transparent part, snap them back together. Even if the two parts are snapped
together, they still can rotate. This means that the orientation of the
connections can be adapted. In case the two parts keep disconnecting, you
can glue them together.
3.5.4
Now glue the complete D.O.D. in a fixed drain pipe Ø40mm or a socket
Ø40mm. Make sure that the D.O.D is mounted horizontally and that the part
with the connections is still snapped in the transparent part.
