Delta Electronics CMC-DN01, Руководство по эксплуатации

Страница: 5 / 27

DeviceNet Slave Communication Card CMC-DN01
DVP-PLC Operation Manual
3
1 Introduction to CMC-DN01
1. Thank you for choosing Delta CMC-DN01 communication card. To ensure correct installation and
operation of the product, please read this operation manual carefully before using it.
2. CMC-DN01 is the DeviceNet communication card able to conduct remote setups and
communications through the DeviceNet bus.
3. CMC-DN01 communication card connects Delta VFD-C2000 series AC motor drive to the
DeviceNet network.
1.1 Features
z Based on the high-speed communication interface of Delta HSSP protocol, able to conduct
immediate control of the AC motor drive.
z Supports Group 2 only connection and polled I/O data exchange.
z For I/O mapping, supports max. 32 words of input and 32 words of output.
z Supports EDS file configuration in DeviceNet configuration software.
z
Supports all baud rates on the DeviceNet bus: 125, 250, 500 kbps and the extendable serial baud
rate mode.
z
Node addresses and serial baud rates can be set up directly on the AC motor drive.
z
The power is automatically supplied by the AC motor drive.
1.2 Specifications
ƒ
DeviceNet Port
Interface 5-PIN open removable connector. Of 5.08mm PIN interval
Transmission method CAN
Transmission cable
Shielded twisted pair cable (with 2 power cables)
Baud rates 125, 250, 500 kbps and extendable serial baud rate modes
Network protocol DeviceNet protocol
ƒ
AC Motor Drive Port
Interface 50-PIN communication terminal
Transmission method SPI communication
Terminal functions
1. Communication with CMC-DN01
2. Supplying power to CMC-DN01
Communication
protocol
Delta HSSP protocol
ƒ
Environment
Interference immunity
ESD (IEC 61800-5-1, IEC 6100-4-2)
EFT (IEC 61800-5-1, IEC 6100-4-4)
Surge Teat (IEC 61800-5-1, IEC 6100-4-5)
Conducted Susceptibility Test (IEC 61800-5-1,IEC 6100-4-6)
Operation/storage
Operation: -10 to 50°C (temperature), 90% (humidity)
Storage: -25 to 70°C (temperature), 95% (humidity)