Delta Electronics CMC-DN01, Руководство по эксплуатации

Страница: 13 / 27

DeviceNet Slave Communication Card CMC-DN01
DVP-PLC Operation Manual
11
P9-72 The two modes of P9-71
When P9-72 is 0, P9-71 enters the
standard mode;
When P9-72 is 1, P9-71 enters the
extended mode.
3. Please ensure that DVPDNET-SL and AC motor drive work normally; the wiring of the whole
network is correct and the power supply of the DeviceNet network is normal. If online fails, please
refer to the chapter of the LED indicators and trouble-shooting.
5.2 Configuring the Network by DeviceNet Builder
In this section, we will introduce how to configure the DeviceNet network by DeviceNet Builder.
„ Configuring VFD-C2000 series AC motor drive
1. Open DeviceNet Builder.
2. Select “Setup” => “Communication Setting” => “Serial Port Setting”.