Delta Electronics CMC-DN01, Руководство по эксплуатации

Страница: 15 / 27

DeviceNet Slave Communication Card CMC-DN01
DVP-PLC Operation Manual
13
7. If the bar does not start to move forward, then it means the communication between the PC
and PLC is abnormal or there are other programs also using the serial port. When the scanning
is completed, a dialog box stating the scanning has been completed, and all the node icons
and device names will be displayed in the software. In this example, the node address of
DVPDNET-SL is “01”.
8. Double click VFD-C2000 Drivers (the AC motor drive connected to CMC-DN01) to open the
“Node Configuration” dialog box. Set both the input size and output size to 4 bytes.
9. Right click VFD-C2000 Drivers and select “Parameter Edit…”.