Delta Electronics CMC-DN01, Руководство по эксплуатации

Страница: 14 / 27

DeviceNet Slave Communication Card CMC-DN01
DVP-PLC Operation Manual 12
3. Set up the communication parameters.
Parameter Definition Default
COM port
Select the computer communication port which is to
communicate with PLC
COM1
Address Input the modbus node ID of PLC 01
Baud rate Select the communication rate between computer and PLC 9,600 bps
Data bits 7
Parity Even parity
Stop bit
Select the communication protocol between computer and
PLC
1
Mode
Select the communication mode between computer and
PLC
ASCII
4. Click “OK” to return to the main page.
5. Select “Network” => “Online” to open the “Select Communication Channel” window.
6. Click “OK” to start scanning the entire network.