13
Delphi EZ-Pro Controller
`
This button is for selecting a firing program and advancing through the programming steps. After
programming is complete, use this button to Start and Stop the firing.
This button is used to change the firing program during programming and to change the display values for
specific program settings. During a firing, use this button for special firing options (including Skip Step).
This button is used to change the display values for specific program settings. It is also used to activate the
Program Review feature.
When using the Increase and Decrease buttons to change number settings, the values will
change more rapidly if the button is held in.
Status Indicator Lights
3 lights are located to the right of the display.
Program
lit during controller programming
Review
lit during Program Review.
Run
lit (blinks) during an active firing.
Audible Alarm
The controller is equipped with a small buzzer that will sound during button presses and at the
successful completion of a firing for 30 seconds. The alarm will also sound to
notify you of
