25
Options Menu
During an active firing, the Increase button will activate an options menu and
scroll through the available options with each button press. These options allow
you to make adjustments to the firing program without stopping the firing. The
available options follow.
Skip Step
During an active heating, cooling or hold time, it is possible to skip ahead to the
next program step. Press the Increase button to display the Skip Step prompt
SStP
. Then Press the Program button to display the current ramp or hold
segment. Press the Program button again to initiate the Skip and the controller
display returns to the normal firing mode. If the Decrease button is pressed, the
Skip function is canceled and the controller display returns to the normal firing
mode.
The Skip function can be used to end a Hold time early or to skip from any
heating/cooling step to the next heating/cooling step. The Skip function does
nothing during the final program step. To end a final program step, simply press
Stop.
Add Hold Time
During an active heating, cooling or hold time, it is possible to add more Hold
time to the current program step. Press the Increase button until the Hold Time
prompt
HLdt
is displayed. Then Press the Program button to display the current
hold time. Press the Increase button to add 5 minute increments to the original
Hold time. Then Press Program button to return to the normal firing mode. If the
Decrease button is pressed while the
HLdt
prompt is displayed, the controller
display returns to the normal firing mode.
Change Heating/Cooling Temperature
During an active heating, cooling or hold time, it is possible to change the heating
or cooling temperature of the current program step. Press the Increase button
until the Change Temperature prompt
CHGt
is displayed. Then Press the
Program button to display the current temperature setting. Adjust the
temperature setting with the Increase or Decrease buttons. Then Press Program
button to return to the normal firing mode. If the Decrease button is pressed while
the
CHGt
prompt is displayed, the controller display returns to the normal firing
mode.
Threshold Alarm
During the firing, it is possible to set an audible alarm and display alarm for when
the actual temperature reaches a specified value. The buzzer will sound (for 30
seconds) and the display will show the alarm code
ALAr.