14
then wait a few seconds for the programming to be set.
The display returns to show the current settings and the
symbol
to indicate you have set the timer.
When the programmed time as been reached the
appliance shuts off automatically.
If you want to go back to operation without the timer,
press the timer button (E) twice.
The timer symbol
disappears from the display.
Using the remote control
The remote control functions correspond to those on the
control panel. See the section “Operation and Use" on the
previous page for a description of the functions.
Important!
This product contains a button battery.
If swallowed, it could cause severe injury or death in just 2
hours. Seek medical attention immediately.
Inserting or replacing the batteries
- The remote control is
provided with a lithium
battery CR2032. To let
the appliance function,
remove the battery
cover strip, by pulling
it.
- To replace the
batteries, remove
the battery cover by
rotating it. Replace the battery paying attention to
respect the right polarity as shown in figure 1.
- Replace the cover rotating it towards the position .
- Old batteries must be removed and disposed off
in accordance with current legislation as they are
harmful to the environment.
WARNINGS:
- This product Contains a button battery. If swallowed, it
could cause severe injury or death in just 2 hours. Seek
medical attention immediately.
- WARNING: Chemical Burn Hazard. Keep batteries away
from children.
- Even used batteries may cause injury.
- Do not dispose of batteries in fire. Batteries may
explode or leak.
SAFETY FUNCTIONS
-
Safety device:
the appliance is fitted with a safety
device that switches it off in the event of accidental
overheating (e.g. obstruction of air intake and outlet
grilles, motor turning slowly or not at all).
To reset, unplug the appliance from the outlet for a
few minutes, remove the cause of overheating, then
plug in again. If the appliance doesn't work please
contact our toll free number for assistance.
- Tip-over safety device:
a tip-over safety device
turns the appliance off if it falls over or is positioned
inappropriately in such a way as to jeopardize safety.
The appliance emits a beep and a dot flashes on the
display. The appliance resumes operation a few sec-
onds after being placed in an upright position again.
TROUBLESHOOTING
In case “
PF
” is displayed and a warning sound is emitted,
there is a fault on the temperature sensor. If the problem
persists contact the Service Center.
If the appliance shuts off unexpectedly:
- Check that the appliance is receiving power.
- Check that the appliance is in the vertical position and
on a flat surface, as the safety tip-over switch may have
been tripped.
- Check the temperature set and the timer: the appliance
may be off because the set temperature has been
reached or the time set on the timer has elapsed.
MAINTENANCE
- Before carrying out any maintenance, always unplug
from the outlet.
- During the season when the appliance is in use, clean
the air intake and outlet grilles regularly using a
vacuum cleaner.
- Never use abrasive powders or solvents to clean the
appliance.
- The dust filter which retains impurities in the air, It is
integrated in the removable back cover. To clean the
filter, remove the grille by pulling outward. Blow it
lightly, then replace it into the appliance.
Fig. 1
Содержание HFX60V15CA
Страница 2: ...2 FR EN page 4 page 10...
Страница 3: ...3 G D E F B C A I H A B C D E F...
Страница 16: ...www delonghi com 5711413251_02 _0818 Printed in China Imprim en Chine...