DeLonghi HFX60V15CA, Инструкция по эксплуатации

Страница: 13 / 16

12 13
DESCRIPTION
A ON/STAND-BY button
B
+/- Adjustment buttons
C
Oscillation button
D “ECO PLUS” function button
E Timer button
F MODE button (for selecting the operating mode)
G
Power indicator light
H
Back cover with filter
I Receiver for remote control
USE
Installation
The appliance can be used on any horizontal surface.
Do not overload the electrical circuit. Avoid using the same
socket for other appliances.
Electrical connection
Before plugging the appliance into the outlet, check that
the power supply corresponds to the value indicated on
the rating plate and that the power supply is adequate for
the load.
Operation and use
- Connect the appliance to the power outlet.
- The appliance emits a beep and the power indicator
light (G) also comes on and remains lit while power to
the appliance is on. The appliance goes into STAND-
BY.
- Press the ON/STAND-BY button (A) to turn on the
appliance. It will begin to heat with the predefined
settings.
- Press the MODE button (F) to select one of the
following functions available:
l
Ventilation
In this operating mode only the fan operates, so the
appliance does not heat the room.
l
Anti-freeze
In this operating mode the appliance keeps the room
at a temperature of 7°C (45°F) to prevent freezing
temperatures.
l
Heating 1 and Heating 2
In this operating mode you can set the desired
temperature by pressing the + and - adjustment
buttons (B).
- Heating 1 (minimum power level):
The appliance operates at the minimum power,
reducing noise and energy consumption to the
minimum.
- Heating 2 (maximum power level):
The appliance operates at the maximum power for
rapid heating of the room.
ECO PLUS function
In this operating mode the appliance will automatically set
the power level to guarantee the best comfort reducing the
energy consumption. In this operating mode the unit may
switch the heating power level from maximum to minimum
and viceversa, several times in an hour. When using the ECO
PLUS function, the maximum temperature setting is 26 °C
(79 °F). To activate this function, press the ECO PLUS button
(D).
Swivel button
If you want the appliance to distribute the airflow over a
larger area, press the oscillation button (C)
.
The appliance will then oscillate right and left. To stop the
oscillation in the desired position, just press oscillation
button (C) again.
Turn the appliance off
To turn off the appliance press button ON/STAND-BY (A). The
display could show the count down for about 6 seconds. To
completely turn off the appliance, remove the plug from the
socket.
Please note:
The display can show the temperature
in both °F and °C. To change the temperature scale, press
and hold the + key for few seconds, then release. Please be
informed that as this is not a precision device, the showed
temperature not necessary corresponds to the real one.
24-HOUR DIGITAL TIMER
This function can be activated from any operating mode.
Delayed switch-on:
with the appliance in the STAND-BY
position, press the timer button (E) .
The display shows the symbol and the time remaining
before switch-on.
To set the timer, use the + and - adjustment buttons (B),
then wait a few seconds for the programming to be set.
The display returns to show for stand-by and the
symbol to indicate you have set the timer.
When the programmed time has been reached, the
appliance turns on with the same settings it had during
the previous operation.
Delayed shut-off:
With the appliance on, press the timer
button (E) . The display shows the symbol and the
time remaining before shut-off.
To set the timer, use the + and – adjustment buttons (B),