DeLonghi ECAM65X.55, Инструкция по эксплуатации

Страница: 29 / 30

29
Coffee does not come out of one or
both of the spouts. The coffee spouts (A8) are blocked. Clean the spouts with a toothpick (fig. 36B).
The appliance does not come on The power cord (C8) connector is not
inserted correctly. Insert the connector as far as it will go in the
socket at the back of the appliance (fig. 1).
It is not plugged into the mains socket. Plug into the mains socket (fig. 1).
The main switch (A21) is not turned on. Press the main switch (fig. 2).
The infuser cannot be extracted The appliance has not been turned off
correctly
Turn the appliance off by pressing the but-
ton (A7) (section “7. Turning the appliance off”).
At the end of descaling, the appliance
requests a third rinse During the two rinse cycles, the water
tank has not been filled to the MAX
level Follow the instructions displayed by the ap-
pliance, but first empty the drip tray to avoid the
water overflowing.
The milk does not come out of the
milk spout (D5) The lid (D2) of the milk container lid
(D) is dirty Clean the milk container lid as described in sec-
tion “15.10 Cleaning the milk container”.
The milk contains large bubbles and
squirts out of the milk spout (D5) or
there is little froth The milk is not cold enough or is not
semi-skimmed. Use skimmed or semi-skimmed milk at refrige-
rator temperature (about 5° C). If the result is
not as you wished, try changing brand of milk.
The froth adjustment dial (D1) is incor-
rectly adjusted. Adjust following the instructions in section
"10. Making cappuccinos and milk-based
coffees".
The milk container lid (D2) or froth
adjustment dial (D1) are dirty Clean the milk container lid and control knob
as described in section "15.10 Cleaning the
milk container".
The hot water/steam connection noz-
zle (A9) is dirty Clean the connection nozzle as described in
section "15.11 Cleaning the hot water/steam
connection nozzle".