DeLonghi ECAM65X.55, Инструкция по эксплуатации

Страница: 16 / 30

16
10.2 Regolare la quantità di schiuma
Turn the froth adjustment dial (D1) to adjust the amount of froth
on the milk delivered while making cappuccinos and milk-based
coffees.
Dial
position Description Recommended for…
NO FROTH HOT MILK (not frothed)/
CAFFELATTE
MIN. FROTH LATTE MACCHIATO /
FLAT WHITE
MAX. FROTH CAPPUCCINO / CAPPUCCI-
NO+ / CAPPUCCINO MIX /
ESPRESSO MACCHIATO / HOT
MILK (frothed)
10.3 Making cappuccinos and milk-
based coffees automatically
1. Fill the milk container (D) and attach it as described above.
2. Select the required beverage:
Directly selected beverages:
• CAPPUCCINO (B10)
• LATTE MACCHIATO (B11)
• CAFFELATTE (B12)
• MILK (B13)
Selectable from the beverages selection menu (B3):
• CAP
• ESPRESSO MACCHIATO
• FLAT WHITE
• CAPPUCCINO MIX
3. A message on the display (B1) instructs you to turn the
froth adjustment dial (D1) according to the froth required
by the original recipe. Turn the dial on the milk container
lid (D2) and confirm the selection by pressing the selection
arrow corresponding to “OK ”.
4. After a few seconds, preparation begins automatically and
an image of the selected beverage appears on the display,
together with a progress bar which gradually fills as prepa-
ration progresses.
Please note: general indications when preparing all
milk-based beverages
• “ ESC”: press to interrupt preparation completely and
go back to the homepage.
• Press the selection arrow corresponding to the “STOP ”
symbol to interrupt milk or coffee delivery and move on to
the next delivery to complete the beverage.
• At the end of delivery, to increase the quantity of coffee in
the cup, press the selection arrow corresponding to “
EXTRA”.
• Preparation of each coffee can be customised (see sections
“13. Customising the beverages” and “14. Memorising your
personal profile”).
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
Once the coffee has been made, the appliance is ready to make
the next beverage.
10.4 Cleaning the milk container after every use
Important! Danger of burns
When cleaning the internal tubes of the milk container, a little
hot water and steam leak out of the frothed milk spout (D5).
Avoid contact with splashes of water.
Each time you use a milk function, “TURN DIAL TO CLEAN POSI-
TION” appears on the display and the milk frother lid must be
cleaned:
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout
(fig. 21);
3. Turn the froth adjustment dial (D1) to “CLEAN” (fig. 20).
“CLEANING UNDERWAY RECIPIENT UNDER SPOUT” appears
on the display (B1) together with a bar which gradually
fills as cleaning progresses. Cleaning stops automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A9) with a sponge (fig. 22).
Please note!
• To prepare a number of cappuccinos or milk-based coffees,
clean the milk container after you have prepared the last
beverage only. To proceed with making the next beverag-
es, press “
ESC”.
• If you do not clean the milk container, the sym-
bol appears on the display to remind you that it needs
cleaning.
• The milk container can be kept in the refrigerator.
• In some cases, before cleaning you must wait for the appli-
ance to heat up.
11. DELIVERING HOT WATER
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.