DeLonghi ECAM65X.55, Инструкция по эксплуатации

Страница: 14 / 30

14
3. Press the selection arrow corresponding to “ STATISTICS”
and check all the statistics by scrolling through the items
using the selection arrow corresponding to “NEXT>”;
4. Press “ ESC” twice to go back to the homepage.
9. MAKING COFFEE
9.1 Selecting the coffee aroma
Select the required coffee aroma by pressing the selection arrow
(B2) corresponding to “AROMA” (B5):
(see “9.6 Making coffee
using pre-ground coffee”)
X-LIGHT
LIGHT
MEDIUM
STRONG
X-STRONG
Custom (if programmed) /
Standard
9.2 Selecting the coffee quantity
Select the required coffee aroma by pressing the selection arrow
(B2) corresponding to “QUANTITY” (B9):
SMALL SIZE
MEDIUM SIZE
LARGE SIZE
X-LARGE SIZE
Custom quantity (if pro-
grammed) / Standard
quantity
9.3 Adjusting the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (A5 - fig. 10).
Please note!
The grinding adjustment dial must only be turned when the
coffee mill is in operation.
If the coffee is delivered too slowly or
not at all, turn one click clockwise to-
wards “7”.
For fuller bodied creamier coffee, turn
one click anticlockwise towards “1” (do
not turn more than one click at a time
otherwise the coffee could be delivered a drop at a time).
These adjustments will only be evident after at least 2 cups of
coffee have been delivered. If this adjustment does not obtain
the desired result, turn the dial another click.
9.4 Tips for a hotter coffee
For hotter coffee, you should:
•
perform a rinse cycle by selecting the “Rinse” function in
the settings menu (see section “8.1 Rinsing
”);
• warm the cups with hot water using the hot water function
(see section “11. Delivering hot water”);
• increase the coffee temperature in the settings menu (see
section “8.10 Coffee temperature ”).
9.5 Making coffee using coffee beans
Important!
Do not use caramelised or candied coffee beans as they could
stick to the coffee mill and make it unusable.
1. Fill the container (A3) (fig. 11) with coffee beans;
2. Place a cup under the coffee spouts (A8);
3. Lower the spouts as near as possible to the cup (fig. 12).
This makes a creamier coffee;
4. Then select your required coffee:
- ESPRESSO (B14)
- COFFEE (B15)
- LONG (B16)
- (B17);
6. Preparation begins. An image of the selected beverage
appears on the display (B1) together with a progress bar
which gradually fills as preparation progresses.
Please note:
• You can prepare 2 cups of ESPRESSO coffee at the same
time by pressing “2X “ (the image is displayed for
a few seconds whenever you start preparing 1 ESPRESSO)
or selecting “2X ESPRESSO” from the beverage selection
menu (B3);