DeLonghi ECAM65X.55, Инструкция по эксплуатации

Страница: 13 / 30

13
”
”
”
”
”
”
3. Press the selection arrow corresponding to “SET LANGUAGE
”;
4. Press the selection arrow corresponding to the language re-
quired (press the selection arrow corresponding to “NEXT>”
to display all the languages available);
5. Press the selection arrow corresponding to “ ESC” twice
to go back to the homepage.
8.13 Beep
This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
1. Press the selection arrow (B2) corresponding to the “
”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “BEEP” appears on
the display;
3. Press the selection arrow corresponding to “BEEP” to disable
( ) or enable ( ) the function;
4. Press the selection arrow corresponding to “ ESC” to go
back to the homepage.
8.14 Cup lighting
This function enables or disables the cup lights. The lighting is
enabled by default.
The lights come on each time a coffee or milk-based beverage is
made and during each rinsing cycle.
To disable or enable this function, proceed as follows:
1. Press the selection arrow (B2) corresponding to the “
”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “CUP LIGHTING” ap-
pears on the display;
3. Press the selection arrow corresponding to “CUP LIGHTING”
to disable ( ) or enable ( ) the function;
4. Press the selection arrow corresponding to “ ESC” to go
back to the homepage.
8.15 Bluetooth
This function enables or disables the protection PIN to connect to
the appliance from a device.
1. Press the selection arrow (B2) corresponding to the “
”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “ BLUETOOTH” ap-
pears on the display;
3. Press the selection arrow corresponding to “ BLUETOOTH”:
The serial number of the machine (19 digits) and a 4 digit
number (PIN) appear on the display (B1);
4. Press the selection arrow to disable ( ) or enable ( )
the request for the PIN when you connect via the APP;
5. Press the selection arrow corresponding to “ ESC” twice
to go back to the homepage.
The preset PIN is “0000”. You are recommended to customise the
PIN directly from the APP.
Please note!
The serial number of the appliance enables it to be identified un-
ambiguously when an association is created with the APP.
8.16 Demo mode
When this mode is enabled, the appliance’s main functions are
illustrated on the display:
1. Press the selection arrow (B2) corresponding to the “
”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “ DEMO
MODE” appears on the display;
3. Press the selection arrow corresponding to “ MODAL-
ITA’ DEMO”. The demo begins;
4. Press the selection arrow corresponding to “ ESC” twice
to go back to the homepage.
8.17 Default values
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the selection arrow (B2) corresponding to the “
”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “ DEFAULT
VALUES” appears on the display;
3. “DEFAULT VALUES CONFIRM?”: to confirm press the selection
arrow corresponding to “OK ” (to cancel, press the selec-
tion arrow corresponding to “
ESC”);
4. “DEFAULT VALUES SET”: press the selection arrow corre-
sponding to “OK ” to confirm;
5. Press the selection arrow corresponding to “ ESC” to go
back to the homepage.
8.18 Statistics
This displays statistics relating to the machine. To display the
statistics, proceed as follows:
1. Press the selection arrow (B2) corresponding to the “
”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “ STATISTICS”
appears on the display;