DeLonghi DINAMICA PLUS ECAM37 95 Series, Инструкция по эксплуатации

Страница: 23 / 32

23
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
INSERT MILK CONTAINER The milk container (E) is missing or not correct-
ly in place. Insert the milk container, pushing it as far as
it will go.
INSERT INFUSER ASSEMBLY The infuser (A20) has not been replaced after
cleaning. Insert the infuser as described in section "13.9
Cleaning the infuser".
WATER CIRCUIT EMPTY
PRESS OK TO START The water circuit is empty Press the selector corresponding to "OK" to
deliver water from the spout (D6) until it flows
out normally.
If the problem persists, make sure the water
tank (A17) is fully inserted.
A new water softener filter has been inserted
(D4) Make sure you have followed the instructions
for inserting the new filter (section "16. Water
softener filter"). If the problem continues,
remove the filter (section 16.3 Removing the
filter".
PRESS OK TO CLEAN OR TURN
DIAL The milk container has been inserted with
the froth adjustment dial (E1) in the CLEAN
position. To proceed with the CLEAN function, press the
selector corresponding to "OK", or turn the froth
adjustment dial to one of the milk positions.