DeLonghi DINAMICA PLUS ECAM37 95 Series, Инструкция по эксплуатации

Страница: 26 / 32

26
PROBLEM POSSIBLE CAUSE REMEDY
The appliance does not come on. It is not plugged into the mains socket. Plug into the mains socket (fig. 1).
Models with removable power cord:
the connector of the power cord (D7*)
is not properly plugged in. Push the connector fully into the socket at the
back of the appliance (fig. 1A).
The main switch (A23) is not pressed
in. Press the main switch (fig. 1B).
The coffee is not hot. The cups were not preheated. Warm the cups by rinsing them with hot
water (Please note: you can use the hot water
function).
The internal circuits of the appliance
have cooled down because 2/3 min-
utes have elapsed since the last coffee
was made. Before making the coffee, heat the infuser by
rinsing using the rinse function (see section
"6.3 Rinse ").
Coffee temperature setting too low. Set a hotter coffee temperature in the menu (see
section "6.9 Coffee temperature ").
Please note: Varying the temperature has
most effect for long beverages.
The machine must be descaled Proceed as described in section “14. Descaling”.
Next, check the water hardness (“15.1 Meas-
uring water hardness”) and make certain the
machine setting matches the local water supply
hardness (“15.2 Setting water hardness ”).
The coffee is weak or not creamy
enough. The coffee is ground too coarsely. Turn the grinding adjustment dial (A5) one
click anticlockwise towards "1" while the cof-
fee mill is in operation (fig. 12). Continue one
click at a time until coffee delivery is satisfac-
tory. The effect is only visible after delivering
2 coffees (see section "7.5 Adjusting the coffee
mill").
The coffee is unsuitable. Use coffee for espresso machines.
Coffee not fresh. The coffee pack has been opened for too long
and has lost its taste.
The coffee is delivered too slowly or a
drop at a time.
The coffee is ground too finely. Turn the grinding adjustment dial (A5) one
click clockwise towards "7" while the coffee
mill is in operation (fig. 12). Continue one click
at a time until coffee delivery is satisfactory.
The effect is only visible after delivering 2
coffees (see section "7.5 Adjusting the coffee
mill").
19. TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact customer services.