background image

10

After delivering the beverage, the quantity setting is reset to the 

 value 

7.4  Making coffee using pre-ground coffee

Important!  

•  Never add pre-ground coffee when the machine is off or it 

could spread through the inside of the machine and dirty 

it. This could damage the machine.

•  Never use more than 1 level measure (D2) as it could soil 

the inside of the coffee machine or block the funnel (A4).

•  When using pre-ground coffee, only one cup can be made 

at a time.

1.  Press the 

 button (C1) until "

" (ground) is 

displayed.

2.  Then select your required coffee:

•  ESPRESSO
•  LONG
•  COFFEE 

3.  "ADD GROUND COFFEE MAX. ONE MEASURE": open the lid 

of the pre-ground coffee funnel (A2).

4.  Make sure the funnel (A4) is not blocked, then add one 

level measure of pre-ground coffee (fig. 11).

11

10

5.  Place a cup under the coffee spouts (A9) (fig. 10).
6.  Press 

: Preparation begins. An image of the 

selected beverage appears on the display, together with a 
progress bar which gradually fills as preparation proceeds.

Once the coffee has been made, the appliance is ready to make 
the next beverage.

Important!  Making LONG coffee

:

Halfway through preparation, the machine requests a fur-

ther level measure of pre-ground coffee. Proceed, then press 

.

7.5  Adjusting the coffee mill

The coffee mill is set by default to prepare coffee correctly and 
should not require regulating initially. 

However, if after making the first few coffees you find that the 
coffee is either too weak and not creamy enough or delivery is 
too slow (a drop at a time), this can be corrected by adjusting 
the grinding adjustment dial (A5) (fig. 12).

12

13

Please note! 

The grinding adjustment dial must only be turned when the 
coffee mill is in operation during the initial phase of coffee 
preparation.

If the coffee is delivered too slowly or not 
at all, turn one click clockwise towards 7.
For fuller bodied creamier coffee, turn 
one click anticlockwise towards 1 (do 
not turn more than one click at a time 
otherwise the coffee could be delivered 

a drop at a time). 
The effect of the adjustment will be noticed only after making 
a further 2 cups of coffee, at least. If this adjustment does not 
produce the desired result, turn the dial another click.

7.6  Tips for a hotter coffee

To make a hotter coffee, proceed as follows:

•  perform a rinse cycle by selecting the “Rinse” function (sec-

tion "6.3 Rinse " );

•  warm the cups with hot water using the hot water function 

(see section "10. Delivering hot water );

•  increase the coffee temperature (section "6.9 Coffee tem-

perature "). Varying the temperature has most effect for 
long beverages.

Содержание DINAMICA PLUS ECAM37 95 Series

































Отзывы: