background image

6

D5.  Cleaning brush
D6.  Hot water spout
D7.  *Power cord (certain models only)

2.5  Description of the milk container 

(page 3 - E)

E1.  Froth adjustment and CLEAN dial

E2.  Milk container lid

E3.  Milk container

E4.  Milk intake tube

E5.  Frothed milk spout (adjustable)

3.  SETTING UP THE APPLIANCE

 

Please note!

•  The first time you use the machine, the water circuit is 

empty and the appliance could be very noisy. The noise 

becomes less as the circuit fills.

•  Coffee has been used to factory test the appliance and it 

is therefore completely normal for there to be traces of 

coffee in the mill. The machine is, however, guaranteed to 

be new.

•  You should customise water hardness as soon as possible 

following the instructions in section "15. Setting water 
hardness".

1.  Models with removable power cord: plug the power cord 

(D7*) connector into the socket (A22*) at the back of the 

appliance and connect the appliance to the mains electri-

city supply, making sure that the main switch (A23) at the 

back of the appliance is pressed in (fig. 1A);

1A

1B

2.   Models with fixed power cord: connect the appliance to the 

mains electricity supply and make sure that the main switch 
(A23) at the back of the appliance is pressed in (fig. 1B);

3.  To select the language of the display, press and hold 

 until the required language appears on the 

display, then press the flag corresponding to the language.

Now follow the instructions indicated on the display of the 
appliance:

4.  Remove the water tank (A17) (fig. 2), fill to the MAX line 

(marked on the tank) with fresh water (fig. 3), then put the 
tank back in the appliance (fig. 4);

3

32

5.  Make sure the hot water spout (D6) is attached to the con-

nection nozzle (A8) (fig. 5)  and place a container with a 
minimum capacity of 200 ml under the coffee spouts (A9) 
and hot water spout (fig. 6);

6.  Press 

to confirm. The appliance delivers 

water from the spout.

7.  At the end of delivery, the appliance proceeds with heating 

by performing a rinse cycle, delivering hot water from the 
coffee spouts.

The coffee machine is now ready for normal use.

Please note! 

•  The first time you use the appliance, you need to make 4 

- 5 cappuccinos before it starts to give satisfactory results.

•  When making the first 4 - 5 cappuccinos, it is normal to 

hear the noise of boiling water. After this, the noise be-

comes less.

•  To improve the performance of your appliance, we recom-

mend installing a water softener filter (D6) as described 

in section "16. Water softener filter". If your model is not 

provided with a filter, you can request one from De'Longhi 

customer services.

5

4

Содержание DINAMICA PLUS ECAM37 95 Series

































Отзывы: