6.
Disconnect the network cable from the computer and the modem.
7.
Disconnect the AC adapter cable from your wireless router to ensure that there is no power connected to the router.
8.
Insert a network cable into the network (RJ-45) connector on the unpowered broadband modem.
9.
Connect the other end of the network cable into the Internet network (RJ-45) connector on the unpowered wireless router.
10.
Ensure that no network or USB cables, other than the network cable connecting the modem and the wireless router, are connected to the broadband
modem.
11.
Turn on
ONLY
your broadband modem and wait for at least 2 minutes for the broadband modem to stabilize. After 2 minutes, proceed to
step 12
.
12.
Turn on your wireless router and wait for at least 2 minutes for the wireless router to stabilize. After 2 minutes, proceed to the
step 13
.
13.
Start your computer and wait until the boot process completes.
14.
See the documentation that came with your wireless router to do the following in order to set up the wireless router:
l
Establish communication between your computer and your wireless router.
l
Configure your wireless router to communicate with your broadband router.
l
Find out your wireless router's broadcast name. The technical term for the name of your router's broadcast name is Service Set Identifier (SSID)
or network name.
15.
If necessary, configure your wireless network card to connect to the wireless network. See
Connecting to a Wireless Local Area Network
.
Connecting to a Wireless Local Area Network
This section provides general procedures for connecting to a network via wireless technology. Specific network names and configuration details vary. See
Wireless Local Area Network (WLAN)
for more information about how to prepare for connecting your computer to a WLAN.
Your wireless network card requires specific software and drivers for connecting to a network. The software is already installed.
Determining the Wireless Network Device Manager
Depending on the software installed on your computer, different wireless configuration utilities may manage your network devices:
l
Your wireless network card's client utility
l
The Windows XP operating system
To determine which wireless configuration utility is managing your wireless network card:
1.
Click the
Start
button, point to
Settings
, and then click
Control Panel
.
2.
Double-click
Network Connections
.
3.
Right-click the
Wireless Network Connection
icon, and then click
View Available Wireless Networks
.
If the
Choose a wireless network
window states
Windows cannot configure this connection
, the wireless network card's client utility is managing the
wireless network card.
If the
Choose a wireless network
window states
Click an item in the list below to connect to a wireless network in range or to get more information
, the
Windows XP operating system is managing the wireless network card.
For specific information about the wireless configuration utility installed on your computer, see your wireless network documentation in the Windows Help and
Support Center.
NOTE:
Wait for a minimum of 5 minutes after disconnecting your broadband modem before you continue with the network setup.
NOTE:
Restart your wireless equipment in the order described below to prevent a potential connection failure.
NOTE:
Before you connect to a WLAN, ensure that you have followed the instructions in
Wireless Local Area Network (WLAN)
.
NOTE:
The following networking instructions do not apply to internal cards with Bluetooth
®
wireless technology or cellular products.
NOTE:
If the software is removed or corrupted, follow the instructions in the user documentation for your wireless network card. Verify the type of
wireless network card installed in your computer and then search for that name on the Dell Support website at support.dell.com. For information on the
type of wireless network card that is installed in your computer, see
Checking Your Wireless Network Card
.
Содержание XPS M1710
Страница 34: ...Back to Contents Page ...