Installing the system board
1
Connect the power cable and eDP cable.
2 Replace the white adhesive tape.
3 Turn the system board over.
4 Align the system board with the screw holders on the computer.
5 Tighten the screws to secure the system board to the computer.
6 Tighten the display hinge screw to the computer.
7
Connect the following cables to the system board.
a hard drive connector
b touchpad connector
c speaker connector
d i/o connector
e eDP connector
f
power switch connector
8 Install the:
a
b
c
d
e
f
g
h
i
Removing and installing components
36