Table 13. Power Management
Option
Description
AC Behavior
Allows you to enable or disable the computer from turning on automatically when an
AC adapter is connected.
Default Setting: Wake on AC is not selected.
Auto On Time
Allows you to set the time at which the computer must turn on automatically. The
options are:
• Disabled (default)
• Every Day
• Weekdays
• Select Days
USB Wake Support
Allows you to enable USB devices to wake the system from Standby.
NOTE:
This feature is only functional when the AC power adapter is connected. If
the AC power adapter is removed during Standby, the system setup will remove
power from all of the USB ports to conserve battery power.
• Enable USB Wake Support
Default Setting: The option is disabled.
Wake on LAN
Allows you to enable or disable the feature that powers on the computer from the Off
state when triggered by a LAN signal.
• Disabled: This option is enabled by default
• LAN Only
Advanced Battery Charge
Configuration
This option enables you to maximize the battery health. By enabling this option, your
system uses the standard charging algorithm and other techniques, during the non-
work hours to improve the battery health.
Disabled (default)
Primary Battery Charge
Configuration
Allows you to select the charging mode for the battery. The options are:
• Adaptive
• Standard - Fully charges your battery at a standard rate.
• Primarily AC use
• Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom
Charge Stop.
NOTE:
All charging mode may not be available for all the batteries. To enable this
option, disable the
Advanced Battery Charge Configuration
option.
Table 14. POST Behavior
Option
Description
Adapter Warnings
Allows you to enable or disable the system setup (BIOS) warning messages when you
use certain power adapters.
Default Setting: Enable Adapter Warnings
Fn Lock Option
Allows the hot key combination <Fn> +<Esc> toggle the primary behavior of F1–F12,
between the standard and secondary functions.
• Lock Mode Disable/Standard. This option is enabled by default.
System Setup
73