Option
Description
• Disabled
• Enabled
• Enabled w/PXE: This option is enabled by default.
SATA Operation
Allows you to configure the internal SATA hard-drive controller. The options are:
• Disabled
• AHCI: This option is enabled by default.
Drives
Allows you to configure the SATA drives on board. All drives are enabled by default. The
options are:
• SATA-0: This option is selected by default.
• SATA-1: This option is selected by default.
SMART Reporting
This field controls whether hard drive errors for integrated drives are reported during
system startup. This technology is part of the SMART (Self-Monitoring Analysis and
Reporting Technology) specification. This option is disabled by default.
• Enable SMART Reporting
USB Configuration
This field configures the integrated USB controller. If Boot Support is enabled, the
system is allowed to boot any type of USB Mass Storage Devices (HDD, memory key,
floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
• Enable Boot Support
• Enable External USB Port
• Enable USB3.0 Controller
NOTE:
USB keyboard and mouse always work in the BIOS setup irrespective of
these settings.
Audio
This field enables or disables the integrated audio controller. By default, the
Enable
Audio
option is selected.
Unobtrusive Mode:
This field field enables or disables all light and sound emissions in the system. By default
option is disabled.
Miscellaneous Devices
Allows you to enable or disable the following devices:
• Enable Camera
• Enabled Secure Digital (SD) Card
NOTE:
All devices are enabled by default.
Table 8. Video
Option
Description
LCD Brightness
Allows you to set the display brightness depending up on the power source (On Battery
and On AC).
NOTE:
The Video setting will only be visible when a video card is installed into the
system.
System Setup
69