Installing the base cover
1
Align the base cover with the screw holders on the computer.
2 Press the edges of the cover until it clicks into place.
3 Tighten the screws to secure the base cover to the computer.
4 Turn the computer over.
5 Open the computer and connect the optical drive connector to the system board.
6 Tighten the screws to secure the base cover to the palmrest.
7
Install the:
a
b
c
After working inside your computer
.
Hard drive
Removing the hard drive assembly
1
Before working inside your computer
2 Remove the:
a
Removing and installing components
22
