Dell Vostro 1400, Руководство пользователя

Страница: 155 / 248

Troubleshooting
155
7
Click Next
→
Finish .
8
When prompted, click Yes .
9
After System Restore finishes collecting data, the computer restarts.
10
After the computer restarts, click OK .
To change the restore point, you can either repeat the steps using a different
restore point, or you can undo the restoration.
If you encounter any error messages during the restore process, follow the
prompts on the screen to correct the error.
Undoing the Last System Restore
NOTICE:
Before you undo the last system restore, save and close all open files and
exit any open programs. Do not alter, open, or delete any files or programs until the
system restoration is complete.
1
Click Start
→
Help and Support .
2
Type
System Restore
in the search field and press <Enter>.
3
Click Undo my last restoration , and then click Next .
Restoring the Computer to the Default Factory Configuration
The Dell Factory Image Restore option allows you to restore your hard drive
back to its original factory configuration as when you first purchased it from
Dell. This option appears on Dell computers that were originally pre-installed
with the Windows Vista™ operating system and does not include computers
purchased through the Express Upgrade promotion or computers that were
upgraded to Windows Vista from a previous version of the Windows
®
operating systems.
NOTICE:
When you restore the computer to the default factory configuration, all
data on the hard drive is deleted. Before performing this procedure, back up
personal files. If you do not back up personal files, the data is lost.
1
Restart the computer. To do this, click Start
→ →
Restart .
2
As the computer restarts, press <F8> until the Advanced Boot Options
menu appears on the screen.
book.book Page 155 Wednesday, September 16, 2009 11:12 AM