Dell Studio XPS 7100 Скачать руководство пользователя страница 7

Страница: 7 / 53

Back to Contents Page

Bluetooth Assembly

Dell™ Studio XPS™ 7100 Service Manual

Removing the Bluetooth Assembly

Replacing the Bluetooth Assembly

Removing the Bluetooth Assembly

Follow the instructions in

Before You Begin

Remove the computer cover (see

Removing the Computer Cover

Remove the front bezel (see

Removing the Front Bezel

Disconnect the Bluetooth

assembly cable from the system board connectors, PWRSW1 and F_USB4 (see

System Board Components

Press in on the tab as shown in the illustration and pull the Bluetooth assembly away from the front panel.

Carefully slide and remove the Bluetooth assembly cable through the slot in the front panel.

Set the Bluetooth assembly aside in a secure location.

Replacing the Bluetooth Assembly

Follow the instructions in

Before You Begin

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING:

To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

WARNING:

Do not operate your computer with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)

removed.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

Bluetooth assembly

Bluetooth assembly tab

Bluetooth assembly cable

front panel

Содержание Studio XPS 7100






















































Результаты поиска

Содержание Studio XPS 7100

Отзывы:

Похожие инструкции для Studio XPS 7100

Бренды по названию

Популярные бренды

Dell Studio XPS 7100, Руководство по обслуживанию

Результаты поиска

Содержание Studio XPS 7100

Отзывы:

Похожие инструкции для Studio XPS 7100

Бренды по названию

Популярные бренды