Dell Studio One 19/1909 Скачать руководство пользователя страница 49

Страница: 49 / 53

Great user manuals database on

Double-click the file icon on the desktop and follow the instructions on the screen.

Flashing the BIOS From a CD

Turn on the computer

Insert the BIOS upgrade CD, and restart the computer.

Follow the instructions that appear on the screen. The computer continues to boot and updates the new BIOS. When the flash update is complete, the
computer will automatically reboot.

Press <F2> during POST to enter the system setup program.

Click

Load Defaults

and click

in pop-up window to reset the computer defaults.

Remove the BIOS upgrade CD from the drive.

Press <Esc> and click

Yes

in the pop-up window to save configuration changes.

The BIOS upgrade finishes and the computer restarts automatically.

Back to Contents Page

NOTE:

If you use a BIOS upgrade CD to flash the BIOS, set up the computer to boot from a CD before inserting the CD.

Содержание Studio One 19/1909






















































Результаты поиска

Содержание Studio One 19/1909

Отзывы:

Похожие инструкции для Studio One 19/1909

Бренды по названию

Популярные бренды

Dell Studio One 19/1909, Руководство по обслуживанию

Результаты поиска

Содержание Studio One 19/1909

Отзывы:

Похожие инструкции для Studio One 19/1909

Бренды по названию

Популярные бренды