Dell Studio 1569 Скачать руководство пользователя страница 43

Страница: 43 / 47

16.

Carefully ease the connectors on the system board out of the computer base and lift the system board assembly out of the computer base.

17.

Turn the system board assembly over.

18.

Follow the instructions from

step 4

step 5

Removing the Coin-Cell Battery

19.

Remove the processor heat sink (see

Removing the Processor Heat Sink

20.

Remove the processor module (see

Removing the Processor Module

Replacing the System Board

Follow the procedures in

Before You Begin

Replace the processor module (see

Replacing the Processor Module

Replace the processor heat sink (see

Replacing the Processor Heat Sink

Ensure that the Mini-Card antenna cables are attached to the computer base.

Follow the instructions from

step 2

step 3

Replacing the Coin-Cell Battery

Connect the hard drive cable and the USB cable to the system board connectors.

Turn the system board assembly over and align the connectors on the system board with the slots in the computer base.

Connect the display cable to the system board connector.

Connect the audio cable to the system board connector.

10.

Replace the three screws that secure the system board to the computer base.

11.

Replace the speakers (see

Replacing the Speakers

) and route the USB cable in the routing guides on the right speaker.

12.

Replace the processor fan (see

Replacing the Processor Fan

13.

Replace the optical drive (see

Replacing the Optical Drive

14.

Replace the hard drive (see

Replacing the Hard Drive

system board assembly

screws (3)

pull-tab

display cable

USB cable

pull-tab

computer base

hard drive cable

pull-tab

Содержание Studio 1569
















































Результаты поиска

Содержание Studio 1569

Отзывы:

Похожие инструкции для Studio 1569

Бренды по названию

Популярные бренды

Dell Studio 1569, Руководство по обслуживанию

Результаты поиска

Содержание Studio 1569

Отзывы:

Похожие инструкции для Studio 1569

Бренды по названию

Популярные бренды