Dell S2810dn, Руководство пользователя

Страница: 127 / 316

Dell™ Printer Configuration Web Tool
127
Reset Print Server
Purpose:
To initialize NVRAM (non-volatile RAM) for the network feature and reboot the printer. You can also initialize
NVRAM of the printer from Reset Defaults in the Printer Settings menu.
Values:
Security
The Security tab includes Set Password , SSL/TLS , IPsec , 802.1x , and IP Filter (IPv4) .
Set Password
Purpose:
To set or change the password that is required to access the setup parameters of the printer from the Dell Printer
Configuration Web Tool . This page can also be displayed by clicking Set Password in the left frame.
NOTE:
To restore the password to the default (NULL), initialize the non-volatile memory (NVM).
NOTE:
You can set the password for access to
Admin Settings
from Panel Lock in Printer Settings.
Values:
Group Role Displays the group role of the printer.
Device Name Specifies the printer name that identifies the Wi-Fi Direct network with up
to 32 alphanumeric characters. Confirm it when selecting the printer name
on your Wi-Fi mobile device.
WPS Setup Configures the Wi-Fi Direct network using WPS.
SSID (Character string
following "DIRECT-
**"
)
Specifies a name to identify the Wi-Fi Direct network. Up to 32
alphanumeric characters can be entered. "DIRECT-" cannot be changed.
Passphrase Displays the passphrase. Confirm it when entering the passphrase into your
Wi-Fi mobile device.
IP Address Displays the IP address of the Wi-Fi Direct.
Subnet Mask Displays the subnet mask.
Paired Device Displays the number of the device currently connected to the Wi-Fi Direct
network.
Current Role
Displays the current group role of the printer.
Current SSID Displays the current SSID. Confirm it when selecting the Wi-Fi Direct
network name on your Wi-Fi mobile device.
Initialize NIC NVRAM Memory
and restart printer.
Click Start to initialize NVRAM, revert network settings to the factory default settings, and
reboot the network capability.
Restart Printer
Click
Start
to reboot the printer.
Administrator Password Sets the password using up to 128 alphanumeric characters (excluding spaces and
colons).
Re-enter Administrator Password Confirms the set password.
Access denial by the authentication
failure of the Administrator
Sets how many times the failure in administrator authentication is allowed in total.
Sets the number from 5 to 255. If you set 0, this mode is disabled.