102
Adding and Replacing Parts
FILE LOCATION: C:\Documents and Settings\reggie_davis\Desktop\Projects-07\BEN\Source\parts.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 1 / 2 5/ 0 7 – FO R PR O O F O N LY
5
Pull up on the pull-tab to disconnect the keyboard cable connector from the keyboard connector on
the system board.
NOTICE:
To avoid scratching the palm rest when replacing the keyboard, hook the tabs along the front edge of the
keyboard into the palm rest, and then secure the keyboard in place.
6
To replace the keyboard, connect the keyboard connector to the system board.
7
Place the tabs along the front edge of the keyboard into the palm rest and lay the keyboard down on
the palmrest.
8
Replace the three screws at the top of the keyboard.
9
Replace the hinge cover.
1
keyboard
2
keyboard screws
3
cable connector
4
keyboard connector
2
1
3
4