Adding and Replacing Parts
101
FILE LOCATION: C:\Documents and Settings\reggie_davis\Desktop\Projects-07\BEN\Source\parts.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 1 / 2 5/ 0 7 – F O R PR O O F O N LY
4
Ease the hinge cover up, moving from right to left, and remove it.
5
To replace the hinge cover, insert the left edge of the cover into the hinge cover slot, and press from left
to right until the cover snaps into place.
Keyboard
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product
Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as a connector on the back of the computer).
1
Follow the procedures in "Before You Begin" on page 95.
2
Remove the hinge cover (see "Hinge Cover" on page 100).
3
Remove the three screws at the top of the keyboard.
NOTICE:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful
when removing and handling the keyboard.
4
Rotate the keyboard forward and lay it on the palm rest to allow access to the keyboard connector on
the system board.
1
hinge cover
2
indent
1
2
