Dell Precision 3650 Tower Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 70

background image

Table 14. System setup options—Keyboard menu (continued)

Keyboard

By default, the option is enabled.

Numlock LED

Enable Numlock LED

Enable or disable Numlock LED.

By default, the option is enabled.

Device Configuration Hotkey Access

Device Configuration Hotkey Access

Enable or disable users to access device configuration by using hotkeys.

By default, the option is enabled.

Table 15. System setup options—Pre-boot Behavior menu

Pre-boot Behavior

Warning and Errors

Enable or disable the action to be done when a warning or error is encountered.

By default, the

Prompt on Warnings and Errors

option is enabled.

Fastboot

Enable to set the speed of the boot process.

By default, the

Minimal

option is enabled.

Extend BIOS POST Time

Set the BIOS POST time.

By default, the

0 seconds

option is enabled.

Table 16. System setup options—Virtualization menu

Virtualization

Intel Virtualization Technology

Enable Intel Virtualization Technology
(VT)

Specify whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities that are provided by Intel Virtualization Technology.

By default, the option is enabled.

VT for Direct I/O

Specify whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities that are provided by Intel Virtualization Technology for
Direct I/O.

By default, the option is enabled.

Intel Trusted Execution Technology
(TXT)

Enable Intel Trusted Execution
Technology (TXT)

Specifies whether a measured Virtual Machine Monitor (MVMM) can utilize the
additional hardware capabilities that are provided by Intel Trusted Execution
Technology.

By default, the option is disabled.

Table 17. System setup options—Performance menu

Performance

Multi Core Support

Active Cores

Enables to change the number of CPU cores available to the operating system.

By default, the

All Cores

options are enabled.

Intel SpeedStep

Enable Intel SpeedStep Technology

Enables the computer to dynamically adjust processor voltage and core
frequency, decreasing average power consumption and heat production.

58

System setup

«
...
56
57
58
59
60
...
»

Содержание Precision 3650 Tower







































































Отзывы:

Нет отзывов

Похожие инструкции для Precision 3650 Tower

Бренд: Barco Страницы: 202

Бренд: UMAX Technologies Страницы: 34

Бренд: A1Touch Страницы: 9

Бренд: DFI Страницы: 13

Бренд: Arbor Technology Страницы: 115

Бренд: C&T Solution Страницы: 118

Бренд: Gateway Страницы: 50

Бренд: MSI Страницы: 29

Бренд: Dell Страницы: 121

Бренд: Gispen Страницы: 6

Бренд: QNAP Страницы: 45

Бренд: Moxa Technologies Страницы: 16

Бренд: TAG Страницы: 50

Бренд: Shuttle Страницы: 1

Prima XPC Barebone SX48P2 Deluxe

Бренд: Shuttle Страницы: 58

Бренд: ESA Страницы: 37

MIT-W102 Series

Бренд: Advantech Страницы: 73

Бренд: Advantech Страницы: 74

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды